Auto load unloader

It is a translation loading and unloading equipment independently developed and manufactured by our company with high performance, high stability and high yield. Put the JEDEC Tray with IC into the equipment manually; The BIB board is also placed into the device. There are two modes of equipment operation: 1. During equipment operation, IC is absorbed from Tray and placed into Socket of BIB board through transfer module. After the sockets in the BIB board are full of ics. Finally, the BIB was taken out manually. 2. Absorb the IC that has been tested from the BIB board and place it into the Tray of OK or NG according to the test result. Finally, remove the BIB or Tray manually. Save manpower, avoid human caused error, improve output.

Equipment advantages

• 01

  2 JEDEC Tray feeding areas for 50 trays

• 02

  1 test board feeding area, can store 2 test boards

• 03

  Compatible with 5*5mm to 46*46mm chips

• 04

  Adopt secondary positioning mode, high success rate of chip placement

• 05

  Good and bad products can be placed in separate BIN

• 06

  High mobility, easy maintenance, reduce labor costs, strong compatibility, high stability

• 07

  Anti-static and EMO switch safety design, door sensors, etc

Basic information

Machine size:2740x1830x1900mm	Uph:≦9000 units
Machine weight:1500KG	Visual detection ability:MarkingLeadBall inspection
Suction nozzle number:≧X8	Storage quantity:2 input/output tray Track
Supported chip size:7x7 to 20x20(mm)	Failure rate:<1/3000
Test board size:≦620mm x 202mm	Data acquisition:Jam rate,UPH,Yield
Contact force:Max 150kg, -/+ 0.2kg